|
DMM Torque Nuts
Four sizes cover a large size range. The colour-coded double dyneema sling is protected on the top by a large countersunk groove. This unique refinement makes racking the units much easier and allows you to climb less encumbered.
The Torque Nuts offer the standard three wedge placements as well as highly emphasised camming placement. The slings are doubled, meaning they rack up short but can be extended when placed.
|
| |

(Click to Enlarge)
|
DMM Torque Nut, Set 1 - 4
Normal Price £55.00 Our Price £51.99
Buy all 4 Torque nuts and save a few £'s.
|
| |
|
Wild Country Rockcentrics
Modern version of the original Hex.
Curved sides seat more effectively than flat sided nuts.
Easy to place or remove!
12mm Dyneema tape
Lighter in weight than the original Hexoriginal Hex.
Seven colour coded sizes.
|
| |

(Click to Enlarge)
|
Wild Country Rockcentrics, size 3 - 9 set
Buy all 7 Rockcentrics and save a few £'s.
|
| |
|
DMM Anodised Wallnut on Wire
DMM Wallnuts are probably the best nuts on the market because of their design, the materials that they are made from and the attention to detail that goes into their manufacture.
Features:
* Complex 3D curves and scallops means secure and fast placement in all rock types
* DMMs accurate heat treatment processes on specifically chosen alloys maximises bite
* Counter sunk and drilled out all the radiuses to avoid stress points where the wire enters the nut
* Rumbled well to remove sharp edges that can hinder placement
* Either Hot forged or CNC'd from sizes 1 to 6 keep strength high and weight to a minimum
* Extruded bar used on sizes 7 to 11 to reduce weight
* Full size crimp because this is critical to safety
* Double sealed label upside down for ease of identification
|
| |
|
DMM Anodised Wallnut on Wire Set 1-11
Set of 11 anodised Wallnuts - sizes 1 - 11.
|
| |

(Click to Enlarge)
|
DMM Alloy Offset on Wire, Set 7 - 11
Set of five Alloy Offsets - sizes 7-11.
Normally £10 each, buy the full set and save £5.
Complex offset shape offers placement opportunities when nothing else will fit.
Features:
* DMM's accurate heat treatment process optimises the physical properties of the alloy to allow maximise bite.
*DMM have recessed the top of the nut and countersunk all other drilled radiuses, in order to both avoid stress points where the wire enters the nut and also protect the wire from abrasion damage.
* The label is upside down so you can check the size easily when they are on your harness.
|
| |

(Click to Enlarge)
|
DMM HB Brass Offsets - Sizes 0-6
Normal Price £65.00 Our Price £59.99
HB Brass Offsets are manufactured from a very specific quality of 'brass' that is silver soldered onto stainless steel wire.
The wires benefit from a colour coded alloy swage, that is only dinked on one side i.e. one wire runs free so that the head is always loaded optimally. The colour coded swage helps with selecting the right size first time.
Specs:
Size 0 - 4.5g, Strength - 2kN, Colour - Gold
Size 1 - 7g, Strength - 4kN, Colour - Blue
Size 2 - 9g, Strength - 5kN, Colour - Red
Size 3 - 10g, Strength - 5kN, Colour - Silver
Size 4 - 14g, Strength - 7kN, Colour - Purple
Size 5 - 17g, Strength - 7kN, Colour - Green
Size 6 - 24g, Strength - 10kN, Colour - Silver
|
| |

(Click to Enlarge)
|
Wild Country Classic Rock Set 1-10
Normal Price £65.00 Our Price £59.99
Wild Country were among the first manufacturer to include curves on two opposing sides, which allow the Rock to be placed easier, whilst still being easy to extract afterwards.
|
| |

(Click to Enlarge)
|
Wild Country Anodised Rocks on Wire
Anodised Rocks - easy to distinguish and fast to select.
Tapered sides - a neat five degree side cut gives new and more solid ‘end-on’ placement possibilities.
Thinner and lighter than Classic Rocks
|
| |

(Click to Enlarge)
|
Wild Country Anodised Rocks on Wire Set 1-8
Buy the set, sizes 1-8 and save a few £'s
Normal Price £75.00
|
| |

(Click to Enlarge)
|
Wild Country Anodised Mini Rocks - Set of 4
The Wild Country Mini Rocks are diminutive versions of Rocks, covering four sizes beneath a Rock One. Each nut is milled out at the top to allow the wires to seat properly inside the nut.
Four sizes 0, 1/4, 1/2, 3/4 - Anodised colour coding
It must be noted that they are much smaller than Rocks and therefore have a much lower breaking strain.
|
| |